Cyberlox + Mixed media falls. How to attach them? help!?

Post Reply
User avatar
Shay Wynter
Posts: 285
Joined: Thu Dec 10, 2009 1:29 pm
Location: Nova Scotia, Canada
Contact:

Cyberlox + Mixed media falls. How to attach them? help!?

Post by Shay Wynter » Fri May 14, 2010 12:00 pm

I amd really wanting to learn how to make cyberlox for myself. I tried before but my problem is attaching the material to the elastic ribbion without it looking terribal.

this question is for the professional cyberlox markers out there, how do you attach material to the base to make it look nice and not messy?

do you have any pictures or video tutorials? I learn better with visual.
xShayxWynterx
Have Facebook? Add my little buisness as a friend.
http://www.facebook.com/home.php?#!/D.Obsession?ref=ts

User avatar
Miss Liberty
Posts: 1653
Joined: Thu Aug 21, 2008 1:19 pm
Location: Orlando, FL
Contact:

Re: Cyberlox + Mixed media falls. How to attach them? help!?

Post by Miss Liberty » Fri May 14, 2010 2:16 pm

I have attached them in varying ways before. I have done the slip knot on itself method. I have also folded them in half and wrapped the top with a rubber band, making a small loop of crin at the top to slide the elastic through. I have also on occasion just tied them on like you would a shoelace.

Out of all of these methods, I personally perfer using the rubber bands to create a loop. I feel you can fit more crin on each layer this way, and have a bit more control over how the pieces lay once the falls are on.

I hope this makes sense! I'm sorry I don't have any pics!

User avatar
rivetlicker_
Posts: 4561
Joined: Thu Aug 21, 2008 4:54 am
Location: Sydney AU

Re: Cyberlox + Mixed media falls. How to attach them? help!?

Post by rivetlicker_ » Sat May 15, 2010 10:32 pm

I bunch a few together and tie with Rexlace. I then use the Rexlace hanging from the bunch to tie it onto a hair tie.

Try this tut.
http://ikickshins.net/hairguide/z-september07.php

User avatar
Shay Wynter
Posts: 285
Joined: Thu Dec 10, 2009 1:29 pm
Location: Nova Scotia, Canada
Contact:

Re: Cyberlox + Mixed media falls. How to attach them? help!?

Post by Shay Wynter » Fri Jun 04, 2010 1:38 pm

thank you for that. I havent actually used crin before. and i think i would be okay with using it, it ties easily enough. i guess its other matrials im worried about. like foam strips and tubing and whatnot. thanks for the advise tough.
xShayxWynterx
Have Facebook? Add my little buisness as a friend.
http://www.facebook.com/home.php?#!/D.Obsession?ref=ts

User avatar
cypherlox
Posts: 113
Joined: Wed Aug 27, 2008 9:17 pm
Location: Ohio, USA
Contact:

Re: Cyberlox + Mixed media falls. How to attach them? help!?

Post by cypherlox » Thu Oct 07, 2010 5:15 pm

Hi Shay :)
For the cyberlox, slipknot method works best for me on triple elastics, makes for an easy install. Just be sure that your base does not get wider then 1 .5"-2", and tie on top of the first layer you tie on, helps give them some height when you put them on.

For the tubing - you can sew though the plastic right into the cyberlox base, or use rubber bands or cable ties. If you do use tubing, I recommend upgrading to mounting the falls on wide flat elastic.

Hope that helps!
CypherLOX.com
Visit us on Facebook!
Visit us on Myspace!
Follow us on Twitter!

Cypherlox.com - Custom Falls & Extensions, Hair Making Supplies, Hair Dye, Goggles, Fuzzy Boot Covers and more!

Post Reply

Return to “Cyberlox, Foam, Tubing & ?!@#!”

Who is online

Users browsing this forum: No registered users and 1 guest